Download the technical specification of the Safety Bubble portable fume hood by using the following button.
If you are looking for a bespoke safety enclosure, please contact us to discuss your requirements.
The Safety Bubble is a bench mounted fume hood system that performs to recognised fume hood containment standards EN 14175 and BS 7989. This
ensures protection for the user when handling hazardous chemicals.
Laboratory air is drawn in through the front opening and carries airborne particulates and chemical vapours away from the user. Airborne contaminants
are captured in a specially designed safe change filtration module. Clean air is then exhausted safely back into the laboratory saving on energy and facility costs.
Performance: EN 14175 and BS 7989 Certified
Airflow: 0.45m/s Face Velocity Factory Calibrated
Alarm: Hot Wire Sensor -Audible/Visual
Filtration: Combined HEPA/Activated Carbon
Validated H14 Efficiency to EN 1822
Filter Life: 2-3 Years Safe Change Design
Power: 90-240V 1ph 50/60hz Load 1.0A
Base: 10mm Chemically Resistant HDPE
Top: 6mm Chemically Resistant Acrylic
Extract Unit: White Powder Coated Steel
Filter Module: White Powder Coated Steel
Accessories: Temperature Monitoring, Humidity Monitoring, Additional Utility Ports
User Install, No Engineer Required, Pre Validated and Tested System Documentation, Pack Provided.
The Safety Bubble fume hood is a self-contained systema and does not require facility air supply.